15.4.2. The /etc/xinetd.d/ Directory
The files in the /etc/xinetd.d/ directory
contains the configuration files for each service managed by
xinetd and the names of the files correlate to
the service. As with xinetd.conf, this file is
read only when the xinetd service is started. In
order for any changes to take effect, the administrator must restart
the xinetd service.
The format of files in the /etc/xinetd.d/
directory use the same conventions as
/etc/xinetd.conf. The primary reason the
configuration for each service is stored in separate file is to make
customization easier and less likely to effect other services.
To get an idea of how these files are structured, consider the
/etc/xinetd.d/telnet file:
service telnet
{
flags = REUSE
socket_type = stream
wait = no
user = root
server = /usr/sbin/in.telnetd
log_on_failure += USERID
disable = yes
} |
These lines control various aspects of the telnet
service:
service — Defines the service name,
usually to match a service listed in the
/etc/services file.
flags — Sets any of a number of
attributes for the connection. REUSE
instructs xinetd to reuse the socket for a
Telnet connection.
socket_type — Sets the network socket
type to stream.
wait — Defines whether the service is
single-threaded (yes) or multi-threaded
(no).
user — Defines what user ID the
process process will run under.
server — Defines the binary
executable to be launched.
log_on_failure — Defines logging
parameters for log_on_failure in addition to
those already defined in xinetd.conf.
disable — Defines whether or not the
service is active.
15.4.3. Altering xinetd Configuration Files
There are a large assortment of directives available for
xinetd protected services. This section highlights
some of the more commonly used options.
15.4.3.1. Logging Options
The following logging options are available for both
/etc/xinetd.conf and the service-specific
configuration files in the /etc/xinetd.d/
directory.
Below is a list of some of the more commonly used logging options:
ATTEMPT — Logs the fact that a failed
attempt was made (log_on_failure).
DURATION — Logs the length of time
the service is used by a remote system
(log_on_success).
EXIT — Logs the exit status or
termination signal of the service
(log_on_success).
HOST — Logs the remote host's IP
address (log_on_failure and
log_on_success).
PID — Logs the process ID of the
server receiving the request
(log_on_success).
RECORD — Records information about
the remote system in the case the service cannot be
started. Only particular services, such as
login and finger, may
use this option (log_on_failure).
USERID — Logs the remote user using
the method defined in RFC 1413 for all multi-threaded stream
services (log_on_failure and
log_on_success).
For a complete list of logging options, consult the
xinetd.conf man page.
15.4.3.2. Access Control Options
Users of xinetd services can choose to use the
TCP wrappers hosts access rules, provide access control via the
xinetd configuration files, or a mixture of
both. Information concerning the use of TCP wrappers hosts access
control files can be found in Section 15.2 TCP Wrappers Configuration Files. This section discusses using
xinetd to control access to services.
![Note](./stylesheet-images/note.png) | Note |
---|
| Unlike TCP wrappers, changes to access control only take effect if
the xinetd administrator restarts the
xinetd service.
|
The xinetd hosts access control differs from the
method used by TCP wrappers. While TCP wrappers places all of the
access configuration within two files,
/etc/hosts.allow and
/etc/hosts.deny, each service's file in
/etc/xinetd.d can contain its own access
control rules.
The following hosts access options are supported by xinetd:
only_from — Allows only the
specified hosts to use the service.
no_access — Blocks listed hosts
from using the service.
access_times — Specifies the time
range when a particular service may be used. The time range must
be stated in 24-hour format notation,
HH:MM-HH:MM.
The only_from and no_access
options can use a list of IP addresses or host names, or can specify
an entire network. Like TCP wrappers, combining
xinetd access control with the enhanced logging
configuration can enhance security by blocking requests from banned
hosts while verbosely record each connection attempt.
For example, the following /etc/xinetd.d/telnet
file can be used to block Telnet access from a particular network
group and restrict the overall time range that even allowed users
can log in:
service telnet
{
disable = no
flags = REUSE
socket_type = stream
wait = no
user = root
server = /usr/sbin/in.telnetd
log_on_failure += USERID
no_access = 10.0.1.0/24
log_on_success += PID HOST EXIT
access_times = 09:45-16:15
} |
In this example, when client system from the 10.0.1.0/24 network,
such as 10.0.1.2, tries access the Telnet service, it will receive a
message stating the following message:
Connection closed by foreign host. |
In addition, their login attempt is logged in
/var/log/secure as follows:
May 15 17:38:49 boo xinetd[16252]: START: telnet pid=16256 from=10.0.1.2
May 15 17:38:49 boo xinetd[16256]: FAIL: telnet address from=10.0.1.2
May 15 17:38:49 boo xinetd[16252]: EXIT: telnet status=0 pid=16256 |
When using TCP wrappers in conjunction with
xinetd access controls, it is important to
understand the relationship between the two access control
mechanisms.
The following is the order of operations followed by
xinetd when client requests a connection:
The xinetd daemon accesses the TCP
wrappers hosts access rules through a
libwrap.a library call. If a deny rule
matches the client host, the connection is dropped. If an allow
rule matches the client host, the connection is passed on to
xinetd.
The xinetd daemon checks its own access
control rules both for the xinetd service and
the requested service. If a deny rule matches the client host
the connection is dropped. Otherwise, xinetd
starts an instance of the requested service and passes control
of the connection to it.
![Important](./stylesheet-images/important.png) | Important |
---|
| Care should be taken when using TCP wrappers access controls in
conjunction with xinetd access
controls. Misconfiguration can cause undesired effects.
|
15.4.3.3. Binding and Redirection Options
The service configuration files for xinetd
support binding the service to an IP address and redirecting
incoming requests for that service to another IP address, hostname,
or port.
Binding is controlled with the bind option in the
service-specific configuration files and links the service to one IP
address on the system. Once configured, the bind
option only allows requests for the proper IP address to access the
service. This way different services can be bound to different
network interfaces based on need.
This is particularly useful for systems with multiple network
adapters or with multiple IP addresses configured. On such a system,
insecure services, like Telnet, can be configured to listen only on
the interface connected to a private network and not to the
interface connected with the Internet.
The redirect option accepts an IP address or
hostname followed by a port number. It configures the service to
redirect any requests for this service to the specified host and
port number. This feature can be used to point to another port
number on the same system, redirect the request to different IP
address on the same machine, shift the request to a totally
different system and port number, or any combination of these
options. In this way, a user connecting to certain service on a
system may be rerouted to another system with no disruption.
The xinetd daemon is able to accomplish this
redirection by spawning a process that stays alive for the duration
of the connection between the requesting client machine and the host
actually providing the service, transferring data between the two
systems.
But the advantages of the bind and
redirect options are most clearly evident when
they are used together. By binding a service to a particular IP
address on a system and then redirecting requests for this service
to a second machine that only the first machine can see, an internal
system can be used to provide services for a totally different
network. Alternatively, these options can be used to limit the
exposure of a particular service on a multi-homed machine to a known
IP address, as well as redirect any requests for that service to
another machine specially configured for that purpose.
For example, consider a system that is used as a firewall with this
setting for its Telnet service:
service telnet
{
socket_type = stream
wait = no
server = /usr/sbin/in.telnetd
log_on_success += DURATION USERID
log_on_failure += USERID
bind = 123.123.123.123
redirect = 10.0.1.13 21 23
} |
The bind and redirect options
in this file ensures that the Telnet service on the machine is bound
to the external IP address (123.123.123.123), the one facing the
Internet. In addition, any requests for Telnet service sent to
123.123.123.123 are redirected via a second network adapter to an
internal IP address (10.0.1.13) that only the firewall and internal
systems can access. The firewall then send the communication between
the two systems, and the connecting system thinks it is
connected to 123.123.123.123 when it is actually connected to a
different machine.
This feature is particularly useful for users with broadband
connections and only one fixed IP address. When using Network
Address Translation (NAT), the systems behind the gateway machine,
which are using internal-only IP addresses, are not available from
outside the gateway system. However, when certain services
controlled by xinetd are configured with the
bind and redirect options, the
gateway machine can act as a type of proxy between outside systems
and a particular internal machine configured to provide the
service. In addition, the various xinetd access
control and logging options are also available for additional
protection, such as limiting the number of simultaneous connections
for the redirected service.
15.4.3.4. Resource Management Options
The xinetd daemon can add a basic level of
protection from a Denial of Service (DoS) attacks. Below is a list
of directives which can aid in limiting the effectiveness of such
attacks:
per_source — Defines the maximum
number of instances for a service per source IP address. It
accepts only integers as an argument and can be used in both
xinetd.conf and in the service-specific
configuration files in the xinetd.d/
directory.
cps — Defines the maximum of
connections per second. This directive takes two integer
arguments separated by white space. The first is the maximum
number of connections allowed to the service per second. The
second is the number of seconds xinetd must
wait before re-enabling the service. It accepts only
integers as an argument and can be used in both
xinetd.conf and in the service-specific
configuration files in the xinetd.d/
directory.
max_load — Defines the CPU usage
threshold for a service. It accepts a floating point number
argument.
There more resource management options available for
xinetd. See the chapter titled Server
Security in the Red Hat Linux Security Guide for more
information. Also consult the xinetd.conf man
page.